Additives are used in small proportions but decide how the product performs, so the dose has to be right every time. A dosing system stores the additive, keeps it uniform, meters it and injects it into a line or a batch, in proportion to the main flow or to a set quantity. Where the additive is a concentrate, powder or viscous liquid, an agitated make-up tank prepares it first.
We size the additive tank and its agitator, choose the dosing pump and meter for the dose rate and accuracy, and mount the whole system on a skid with its piping and controls. Where the additive must be mixed into the main stream as it is injected, a static mixer after the injection point does the job.
Where it is used
- Fuel and lube additive dosing
- Oilfield chemical injection
- Water treatment chemical dosing
- Additive blending in chemical plants
- Dosing at loading and filling points
- Polymer and flocculant make-up
How FMT builds it
| Additive tank | Storage or make-up tank in SS 304, SS 316 / 316L or carbon steel, with an agitator where the additive must stay uniform |
|---|---|
| Dosing | Metering pumps, or pumps with flow meters, sized for the dose rate and accuracy |
| Control | Dosing in proportion to the main flow, or a set quantity per batch |
| Injection | Injection point with check valve; static mixer after it where the additive must be mixed in-line |
| Skid | Tank, pumps, filters, piping and panel on one skid, tested before dispatch |
| Hazardous areas | Flameproof motors and instruments where the area classification requires it |
The red lines show how the impeller moves the liquid. Every FMT unit is sized for its own vessel, product and duty, so yours is drawn for your tank in the offer.
Send your vessel for a drawing

What we need to size it
- The additive and the product it goes into, with their properties
- Main flow rate or batch size, and the dose rate or ratio
- Accuracy needed
- Whether the additive settles, separates or needs make-up from powder or concentrate
- Where it is injected: pipeline, loading point or batch tank
- Hazardous-area classification and power supply

