An FMT engineer replies within one working day. Budget prices from tank size and duty. +91 73852 62875WhatsAppsales@fluidmixtech.comExport buyers

Mixers for EV battery materials

Electrode slurry and battery chemical processes, where the uniformity of the dispersion shows directly in the quality of the coated electrode.

Electrode slurry combines active material, binder, conductive additive and solvent into a viscous, uniform dispersion. Agglomerates or uneven solids show up as defects when the slurry is coated, so the mixing has to wet and disperse the powders completely and then keep the slurry uniform without trapping air.

We supply dispersers and multi-shaft mixers for slurry preparation, and agitated vessels for the chemical steps around it. Tell us your batch size, solids loading and viscosity, and the process steps, and we will propose the arrangement.

Typical mixing duties

  • Electrode slurry dispersion
  • Binder dissolving
  • Holding and transfer of slurry
  • Chemical process tanks for battery materials

What we design for

  • High shear dispersion with slow wall-sweeping turnover
  • Variable speed on each shaft
  • Jacket for temperature control
  • Closed vessel to limit air entrainment

Equipment for eV batteries

Common questions

Which mixer is used for battery slurry?
Usually a multi-shaft arrangement: a high speed disperser to wet and disperse the powders and a slow agitator to keep the viscous slurry moving. The right combination depends on the solids loading and viscosity.
Can you build pilot-scale mixers?
Tell us the batch size you need. We will confirm what we can build for it.

Send us your vessel. We size the agitator.

Tank size, product and what the agitator has to do is enough to start. Send a drawing, a datasheet or just a photo of the tank, and we reply with a recommended design and price, or a budget price first if you need one.

An FMT engineer replies within one working day.