An FMT engineer replies within one working day. Budget prices from tank size and duty. +91 73852 62875WhatsAppsales@fluidmixtech.comExport buyers

Side entry mixers

A side entry mixer enters the tank through a nozzle near the bottom of the shell. The drive stays outside at ground level and the impeller sets the whole tank circulating. It is the economical way to mix large storage tanks without a long shaft and a heavy roof structure.

An FMT engineer replies within one working dayBudget price from tank size and duty

Side entry mixer installed on a large storage tank
Side entry mixer installed on a large storage tank

FMT builds side entry mixers from 2.2 to 55 kW, with a shaft speed of 280 or 450 rpm, driven through a gearbox or a single-stage V-belt. The impeller is a hydrofoil or a propeller, the shaft seal a single or double mechanical seal, and the wetted parts SS 304 or SS 316 (duplex for FGD duty). A flameproof motor is supplied where the area classification requires it.

How many mixers a tank needs, and of what size, depends on its diameter, liquid height, product and the mixing objective. We work this out from your tank data and give you the number of units, motor rating, nozzle size and elevation with the offer. The full range, industry configurations and a design guide are on our dedicated site, sideentrymixer.com.

Where it is used

  • Crude oil and product storage tanks
  • FGD limestone and gypsum slurry tanks
  • Milk storage silos
  • Edible oil storage tanks
  • Pulp stock chests
  • Wastewater equalisation tanks
  • Distillery and fermentation tanks
  • CBG and biogas digesters

How FMT builds it

Motor power2.2 to 55 kW
Shaft speed280 or 450 rpm
DriveGearbox, or single-stage V-belt
ImpellerHydrofoil or propeller
Shaft sealSingle or double mechanical seal
Wetted partsSS 304 or SS 316; duplex for FGD duty
MotorFlameproof (FLP) where the hazardous-area classification requires it
Typical arrangement

The red lines show how the impeller moves the liquid. Every FMT unit is sized for its own vessel, product and duty, so yours is drawn for your tank in the offer.

Send your vessel for a drawing
Side entry mixer: geared motor, lantern, tank flange, shaft and propeller
Side entry mixer: geared motor, lantern, tank flange, shaft and propeller
Side entry mixer drive with geared motor, lantern and tank flange
Side entry mixer drive with geared motor, lantern and tank flange

What we need to size it

  • Vessel diameter, straight-side height and bottom shape (dished, conical, flat)
  • Working volume and liquid level range, including the lowest level at which mixing must continue
  • Product: density, viscosity at operating temperature, solids content and particle size
  • What the agitator must do: blend, suspend, disperse, dissolve, heat or cool, react
  • Operating and design pressure and temperature, and whether the vessel is open or closed
  • Preferred materials, seal type, motor make, power supply and hazardous-area classification
Send what you have. A vessel drawing and a short description of the product and duty is enough to start; we ask for anything else we need. Send an enquiry

Common questions

Can a side entry mixer be fitted to an existing tank?
Yes. It needs a flanged nozzle on the lower shell. If the tank does not have one, a nozzle can be added during a planned shutdown. We give you the nozzle size, elevation and orientation with our offer.
How many side entry mixers does a tank need?
It depends on the tank diameter, liquid height, viscosity and the mixing objective. Small tanks often need one unit; large crude oil tanks commonly use several mixers grouped on one side of the shell. We size this from your tank data.

Send us your vessel. We size the agitator.

Tank size, product and what the agitator has to do is enough to start. Send a drawing, a datasheet or just a photo of the tank, and we reply with a recommended design and price, or a budget price first if you need one.

An FMT engineer replies within one working day.