An FMT engineer replies within one working day. Budget prices from tank size and duty. +91 73852 62875WhatsAppsales@fluidmixtech.comExport buyers

Ribbon blenders

A horizontal U-shaped trough with a double helical ribbon agitator. The outer ribbon moves material one way along the trough and the inner ribbon moves it back, so the whole batch turns over quickly and evenly.

An FMT engineer replies within one working dayBudget price from tank size and duty

Ribbon agitator in the trough of a ribbon blender, during assembly
Ribbon agitator in the trough of a ribbon blender, during assembly

Ribbon blenders are the standard machine for blending dry powders and granules, and for adding small amounts of liquid to a powder. The opposed ribbons move material both along the trough and across it, so ingredients of different sizes and densities are brought together without the dead zones of a simple paddle.

We size the trough for the batch volume and bulk density, the ribbons and drive for the material, and the discharge for how the blend leaves the machine. The main drive is a geared motor with a bevel or planetary gearbox, and operation can be manual, semi-automatic or automatic.

Where it is used

  • Pharma powders and premixes
  • Food powders and premixes
  • Chemical and fertiliser powders
  • Cosmetic powders
  • Granules and free-flowing bulk solids
  • Adding small amounts of liquid to powders

How FMT builds it

TroughHorizontal U-trough with a top cover and charging openings
AgitatorDouble helical ribbon: outer and inner ribbons of opposite hand
DriveGeared motor with a bevel or planetary gearbox
DischargeBottom discharge valve chosen for the material
Contact partsSS 304; other materials on request
OperationManual, semi-automatic or automatic
Typical arrangement

The red lines show how the impeller moves the liquid. Every FMT unit is sized for its own vessel, product and duty, so yours is drawn for your tank in the offer.

Send your vessel for a drawing

What we need to size it

  • Batch size by weight, and the bulk density of the blend
  • The materials: particle size, flow behaviour, and any that are fragile, sticky or abrasive
  • Any liquids to be added, and how much
  • How the blender is charged and discharged
  • The blend time you are aiming for
  • Hygiene, dust and hazardous-area requirements
Send what you have. A vessel drawing and a short description of the product and duty is enough to start; we ask for anything else we need. Send an enquiry

Common questions

Can liquids be added in a ribbon blender?
Yes. Small amounts of liquid can be added while the powder is blended, usually sprayed over the moving bed so that they spread evenly instead of forming lumps. Tell us the liquid and the quantity.
Ribbon blender or agitated tank?
A ribbon blender is for powders, granules and stiff pastes. Once the product is a liquid or a pourable slurry, an agitated tank does the job better; see mixing tanks.
How full should a ribbon blender be?
Ribbon blenders work best partly filled, so that the ribbons can move material across the whole bed. We size the trough so that your batch sits in that range.

Send us your vessel. We size the agitator.

Tank size, product and what the agitator has to do is enough to start. Send a drawing, a datasheet or just a photo of the tank, and we reply with a recommended design and price, or a budget price first if you need one.

An FMT engineer replies within one working day.