An FMT engineer replies within one working day. Budget prices from tank size and duty. +91 73852 62875WhatsAppsales@fluidmixtech.comExport buyers

Mixers for paints and coatings

From pigment dispersion to let-down and tinting. Each step of a paint batch needs a different kind of mixing, and the equipment has to match it.

Paint is made in stages. Pigments and fillers are wetted and dispersed at high shear, usually with a high speed disperser; the mill base is then let down with resin and solvent or water in a larger tank with a gentler agitator, and finally tinted and adjusted. Putty, primers and texture finishes are thick enough to need a multi-shaft mixer.

We size dispersers for the batch size and viscosity, and let-down agitators for fast, even blending without entraining air, which spoils the finish.

Typical mixing duties

  • Pigment and filler dispersion
  • Let-down and blending with resin and solvent
  • Tinting and shade adjustment
  • Putty, primer and texture finish mixing
  • Emulsion paint production
  • Storage of finished paint

What we design for

  • Disperser disc size and speed matched to the vessel
  • Variable speed so shear can follow the viscosity
  • Flameproof motors for solvent-based paints
  • Low air entrainment in let-down and storage tanks

Equipment for paints and coatings

Common questions

What size of disperser do I need?
It depends on the batch volume, the vessel diameter and the viscosity of the mill base. Tell us the batch size and the product, and we will recommend the disc diameter, motor power and speed range.
Why does my paint have air bubbles after mixing?
Usually because the agitator runs too fast near the surface or creates a vortex. A different impeller, a lower speed or baffles can fix it. Send us the tank and agitator details.

Send us your vessel. We size the agitator.

Tank size, product and what the agitator has to do is enough to start. Send a drawing, a datasheet or just a photo of the tank, and we reply with a recommended design and price, or a budget price first if you need one.

An FMT engineer replies within one working day.