Our works in Pune
FMT builds in its own units at Chikhali and Talawade, with its design office in Bhosari. Shafts, hubs and impellers are machined here, vessels are fabricated here, and every agitator is assembled and run before it leaves.

Design and manufacture under one roof
The drawing you approve is the agitator you receive, because the engineers who size it and the shop that makes it work side by side.

Machining
Heavy duty lathes and radial drilling for shafts, hubs, flanges and couplings.

Fabrication
Stainless and carbon steel vessels, reactors, jackets and limpet coils, tanks and impellers.

Assembly and run test
Agitators assembled on their vessels or test stands and run before dispatch.

Heavy-duty drives
Industrial gearboxes chosen for the torque, speed and service of each agitator, like this one for a 90 kW agitator on a 20 KL vessel.
Inside the fabrication hall
Vessel shells, jackets, nozzles, frames and mixer troughs are made here under the overhead cranes, by FMT's own fitters and welders.





Run test and dispatch
Every agitator is run before it leaves the works, then packed for the road or the sea.

Test frame
Agitators hang in the test frame and run on their own drive before dispatch.

Water trial
When we build the vessel too, the agitator can run in it with water before it ships.

Packing
Vessels wrapped and strapped, agitators crated, every part marked against the packing list.

Visit, or see it on a video call
You are welcome at our works to see your equipment being made, or to inspect it before dispatch. If you cannot travel, book a video call: an engineer walks you through the shop and goes over your design with you.
- Works, Unit 1: Shop No 1, Golande Industrial Park, Vitthal Nagar, Ganesh Nagar, Chikhali, Pimpri-Chinchwad, Pune 411062
- Works, Unit 2: Plot No 9, Gat No 1562, opp. Bharat Weighbridge, Talawade, Pune 411062
- Office: B-323, Gera's Imperium Gateway, Bhosari, Pune 411034
Quality
FMT works to an ISO 9001:2015 quality management system (certificate E2023126448). Each order has an inspection plan agreed with the customer, and each agitator leaves with its datasheet, drawing and manual.
- Vessels and reactors designed to ASME Section VIII or PED on request
- Flameproof or ATEX-certified motors for hazardous areas
- FEA of shafts and structures, CFD of impeller flow where the duty needs it
- 3-A / EHEDG hygienic design for food and pharma on request




