An FMT engineer replies within one working day. Budget prices from tank size and duty. +91 73852 62875WhatsAppsales@fluidmixtech.comExport buyers

Agitators for food and beverage processing

Syrup and beverage blending, dairy, sauces, edible oil and pet food. Stainless steel, cleanable construction and mixing that treats the product as gently or as hard as it needs.

Food and beverage plants mix everything from thin syrups to thick sauces, and dissolve sugar, gums and powders that lump if they are added the wrong way. The equipment must be easy to clean, with no places where product can collect, and drives that do not contaminate the product.

We build in SS 304 and SS 316 with cleanable welds and finishes, and choose the impeller for the product: hydrofoils for fast, gentle blending, high shear for dissolving and emulsifying, and anchors for viscous products in jacketed cookers.

Typical mixing duties

  • Sugar dissolving and syrup blending
  • Beverage concentrate preparation
  • Milk and dairy product storage
  • Sauces, dressings and emulsions
  • Edible oil blending and storage
  • Pet food and feed slurries

What we design for

  • SS 304 or SS 316 wetted parts with cleanable finish
  • Food-safe seal and gasket materials
  • Gentle blending without air entrainment
  • High shear for dissolving powders without lumps
  • 3-A / EHEDG hygienic design on request

Equipment for food and beverages

Common questions

How do you avoid lumps when dissolving sugar or gums?
By adding the powder into a zone of high shear, usually with a rotor-stator or bottom entry high shear mixer, while a slow agitator turns the batch over. Tipping powder onto a slow-moving surface is what causes lumps.
Do you supply milk silo agitators?
Yes. Large milk storage silos usually use side entry agitators; see our side entry mixer range on sideentrymixer.com.

Send us your vessel. We size the agitator.

Tank size, product and what the agitator has to do is enough to start. Send a drawing, a datasheet or just a photo of the tank, and we reply with a recommended design and price, or a budget price first if you need one.

An FMT engineer replies within one working day.