A shell and tube exchanger passes one fluid through a bundle of tubes and the other around them inside a shell, guided by baffles. The type comes down to temperature difference, cleaning and cost. A fixed tubesheet exchanger is the simplest and most economical, but its shell side cannot be cleaned mechanically, and a large temperature difference between shell and tubes calls for an expansion joint. A U-tube bundle expands freely and can be pulled out of the shell, though the insides of the bends are harder to clean. A double pipe exchanger, one pipe inside another, suits small duties and high pressures.
We size each exchanger from your duty: flow rates, temperatures, fluid properties and allowable pressure drop, and lay out the tubes, passes and baffles to suit. Tubes are expanded or welded into the tubesheets. For reactors and blending plants we supply the condensers, coolers and heaters as part of the package, with bought-out plate exchangers where the duty suits them.
Where it is used
- Process heaters and coolers
- Condensers for reactors and distillation
- Product coolers after reaction or blending
- Heat recovery between process streams
- Food processing duties
- Steam and thermic oil heaters
How FMT builds it
| Fixed tubesheet | Straight tubes between two tubesheets; the simplest and most economical type |
|---|---|
| U-tube | Bundle free to expand and removable from the shell |
| Double pipe | Pipe-in-pipe sections for small duties and high pressure |
| Plate | Bought-out plate exchangers, supplied within plant packages |
| Tube joints | Expanded or welded into the tubesheet |
| Materials | SS 304 and SS 316 / 316L; SS 317L, 904L and nickel alloys on request |
| Orientation | Horizontal or vertical |
The red lines show how the impeller moves the liquid. Every FMT unit is sized for its own vessel, product and duty, so yours is drawn for your tank in the offer.
Send your vessel for a drawing

What we need to size it
- The duty: what is heated, cooled or condensed, and by what
- Flow rates and inlet and outlet temperatures of both fluids
- Fluid properties, and whether either fluid fouls
- Allowable pressure drop on each side
- Design pressure and temperature on each side
- Material, and any limits on size or weight



