An FMT engineer replies within one working day. Budget prices from tank size and duty. +91 73852 62875WhatsAppsales@fluidmixtech.comExport buyers

Mixer and agitator design

Process and mechanical design of agitators for a specific vessel and duty, as part of an FMT supply or for your own project and tender documents.

Agitator shafts being machined on a heavy duty lathe
Agitator shafts being machined on a heavy duty lathe

An agitator is designed twice: once for the process and once for the machine. The process design answers what the agitator must do and chooses the impeller type, diameter, number, position and speed that do it with the least power. The mechanical design makes sure the shaft, bearings, seal, drive and mounting carry the resulting loads for years without vibration, deflection at the seal or fatigue.

FMT does both with its own design methods, and checks the result against the vessel: nozzle sizes, head thickness, baffles, the lowest working level and the space for maintenance.

What it includes

  • Review of the process data and mixing objective
  • Impeller type, diameter, number and position
  • Speed, absorbed power and motor rating
  • Shaft design: bending, stress, deflection and critical speed
  • Bearing housing, mounting stool and steady bearing where needed
  • Seal selection for pressure, temperature and product
  • Datasheet and general arrangement drawing
  • FEA of shafts and structures, and CFD of impeller flow where the duty needs it

When to use it

  • New vessels and process plants
  • Tender specifications and datasheets for EPC projects
  • Scale-up from pilot to production
  • Changes of product, batch size or process on an existing vessel

Common questions

What do you need to start an agitator design?
The vessel drawing or dimensions, the working volume and levels, the product properties (density, viscosity, solids), the operating pressure and temperature, and what the agitator must achieve. We ask for anything else we need.
Do you design agitators for other fabricators?
Yes, where the project calls for it. Tell us what the design is for and what you need delivered: a datasheet, a general arrangement drawing or a full design package.

Send us your vessel. We size the agitator.

Tank size, product and what the agitator has to do is enough to start. Send a drawing, a datasheet or just a photo of the tank, and we reply with a recommended design and price, or a budget price first if you need one.

An FMT engineer replies within one working day.