An FMT engineer replies within one working day. Budget prices from tank size and duty. +91 73852 62875WhatsAppsales@fluidmixtech.comExport buyers

Static mixers

A set of fixed mixing elements inside a pipe. As the streams flow through, the elements split, turn and recombine them until they are uniform, with no moving parts and no drive.

An FMT engineer replies within one working dayBudget price from tank size and duty

Typical arrangement. Every FMT unit is designed for its own vessel and duty.

A static mixer does in a pipe what an agitator does in a tank. Each helical element divides the flow and rotates it; the next element, twisted the other way, divides it again, and after a series of elements the streams that entered together leave as one uniform stream. The energy comes from the pump that already moves the liquid, at the cost of some extra pressure drop.

Static mixers are used wherever streams have to be combined continuously: dosing a chemical into a water or process line, diluting a concentrate, neutralising with acid or alkali, blending an additive into a product on its way to storage, or dispersing a gas into a liquid. We size the mixer for the flow rates, viscosities and ratio of the streams and the degree of mixing needed, and check the pressure drop against what your pump can supply.

Where it is used

  • Chemical dosing and injection into a pipeline
  • Dilution of concentrates
  • pH adjustment and neutralisation
  • Blending additives into product lines
  • Gas-liquid dispersion
  • Inline blending in blending plants and skids

How FMT builds it

ElementsHelical mixing elements, their number chosen for the mixing duty
HousingPipe section with flanged ends in your line size
MaterialsSS 304, SS 316 / 316L or carbon steel; special alloys on request
DosingInjection nozzle ahead of the elements where an additive is dosed
InstallationHorizontal or vertical, in a new line or as a retrofit
FinishMirror internal finish on request
Typical arrangement

The red lines show how the impeller moves the liquid. Every FMT unit is sized for its own vessel, product and duty, so yours is drawn for your tank in the offer.

Send your vessel for a drawing

What we need to size it

  • Flow rate of each stream, from minimum to maximum
  • Viscosity and density of each stream
  • Mixing ratio and how uniform the result must be
  • Pressure drop the line can take
  • Line size, design pressure and temperature
  • Material, or the fluids so that we can propose one
Send what you have. A vessel drawing and a short description of the product and duty is enough to start; we ask for anything else we need. Send an enquiry

Common questions

Static mixer or agitated tank: which do I need?
A static mixer suits continuous streams that only need to be combined, with no hold-up time. An agitated tank suits batch work, long reaction or dissolving times, solids, and products that are tested before release. Many blending plants use both; see batch vs inline blending.
How many mixing elements are needed?
It depends on the flow regime, the viscosities and how uniform the mixture must be. Turbulent, low-viscosity streams need only a few elements; laminar, viscous ones need more. We size the number of elements and the pressure drop from your process data.
Does a static mixer need maintenance?
There are no moving parts, so there is nothing to lubricate or wear out in normal service. If the product can foul or leave deposits, tell us, so that the mixer can be designed for cleaning.

Send us your vessel. We size the agitator.

Tank size, product and what the agitator has to do is enough to start. Send a drawing, a datasheet or just a photo of the tank, and we reply with a recommended design and price, or a budget price first if you need one.

An FMT engineer replies within one working day.