An FMT engineer replies within one working day. Budget prices from tank size and duty. +91 73852 62875WhatsAppsales@fluidmixtech.comExport buyers

Agitators for chemical plants

Reactors, blending tanks, dissolvers and storage tanks in bulk, specialty and fine chemical plants. The chemistry decides the materials and the seal; the process decides the impeller.

Chemical plants ask more of an agitator than most industries: corrosive or flammable products, pressure and vacuum, heating and cooling through a jacket, and batches whose viscosity changes as the reaction runs. The agitator has to mix well at every stage, and its seal has to contain the product for years.

We size the impellers for the hardest point in the batch, which may be the start, the end or a reaction step in between, and choose a mechanical seal arrangement to match the vapour, pressure and toxicity of the product.

Typical mixing duties

  • Reaction with heat removal through a jacket
  • Blending of liquids and additives
  • Dissolving solids and preparing solutions
  • Neutralisation and pH adjustment
  • Keeping catalysts and solids in suspension
  • Storage tank homogenising

What we design for

  • Wetted materials checked against the chemistry, temperature and chlorides
  • Single or double mechanical seal for closed and pressurised vessels
  • Flameproof motors where solvents create a hazardous area
  • Shaft and bearings designed for the loads at the viscosity extreme of the batch

Equipment for chemicals

Common questions

Which seal is right for a chemical reactor?
For a closed reactor with solvent vapour or pressure, a mechanical seal. A double mechanical seal with a barrier fluid system is used where no leakage to atmosphere is acceptable, for example with toxic or flammable products.
Can you replace the agitator on an existing reactor?
Yes. Send us the reactor drawing, the nozzle details and the process data. We design the agitator to fit the existing mounting where possible, and tell you if the impeller arrangement should change.

Send us your vessel. We size the agitator.

Tank size, product and what the agitator has to do is enough to start. Send a drawing, a datasheet or just a photo of the tank, and we reply with a recommended design and price, or a budget price first if you need one.

An FMT engineer replies within one working day.