Agitators, mixers and agitated vessels
Everything we build is designed for its vessel, product and duty. Choose the arrangement that fits your process, or send us the details and we will recommend one.
Agitators
Top entry agitatorsReactors, blend and storage tanksA vertical agitator mounted on the vessel top, with the drive, bearing housing and seal outside the liquid and the shaft and impellers inside. It is the most common arrangement for reactors, blending and storage tanks, and the core of what FMT builds.
Side entry mixersLarge storage tanks, 2.2–55 kWA side entry mixer enters the tank through a nozzle near the bottom of the shell. The drive stays outside at ground level and the impeller sets the whole tank circulating. It is the economical way to mix large storage tanks without a long shaft and a heavy roof structure.
IBC mixersAgitators for 1000-litre IBC totesA geared agitator on a frame that sits across the top of an IBC tote, with the shaft and impeller entering through the tote opening. It mixes the product in the tote it is delivered in, then lifts off and moves to the next one.
Magnetic mixersSeal-less, no shaft through the vesselTorque passes from an outer magnet assembly, through a closed containment shell, to an inner magnet carrying the impeller. No shaft passes through the vessel wall, so there is no shaft seal to leak or to wear.
Mud agitators (mud mixers)Drilling fluid and mud tanksA mud agitator keeps drilling fluid moving in the mud tanks, so weighting material and drilled solids stay in suspension and the mud pumped downhole stays uniform. FMT builds mud agitators sized for each tank compartment, with flameproof drives for the rig floor.
ImpellersReplacement and upgrade impellersImpellers supplied on their own, with the hub bored and keyed to fit your existing shaft. Use them to replace a worn impeller, or to upgrade one that does not do the job.
Bottom entry agitatorsDrive under the vessel, clear top headThe drive sits under the vessel and a short shaft enters through the bottom head. The top head stays free for nozzles, manholes and instruments, and the impeller keeps working as the vessel drains down.
Mixers and blenders
High speed dispersersSaw-tooth disc, powder wettingA high speed disperser runs a saw-tooth disc at high peripheral speed close to the vessel bottom. It pulls powder down into the liquid, breaks up agglomerates and produces a smooth, uniform dispersion.
Rotor-stator mixersHigh shear emulsifying and homogenisingA rotor turning at high speed inside a close-fitting stator. Product is drawn into the head and forced out through the stator openings at high velocity, which breaks droplets and particles down quickly.
Bottom entry high shear mixersRotor-stator in the vessel bottomA rotor-stator head mounted in the bottom of the vessel, usually working with a slow top agitator. The top agitator feeds the batch down to the head, which shears it and returns it to the vessel.
Multi-shaft mixersAnchor plus disperser for viscous batchesTwo or three agitators on one vessel, each with its own drive: a slow anchor that sweeps the wall and turns the whole batch over, with a high speed disperser or rotor-stator that does the shearing.
Static mixersInline mixing with no moving partsA set of fixed mixing elements inside a pipe. As the streams flow through, the elements split, turn and recombine them until they are uniform, with no moving parts and no drive.
Ribbon blendersPowders, granules and pastesA horizontal U-shaped trough with a double helical ribbon agitator. The outer ribbon moves material one way along the trough and the inner ribbon moves it back, so the whole batch turns over quickly and evenly.
Reactors
Chemical reactorsAgitated SS reactors for batch reactionsAgitated stainless steel reactors for batch reactions: the vessel, its heating and cooling jacket or coil, and the agitator designed together for your chemistry, pressure and temperature.
Jacketed and limpet coil reactorsHeating and cooling by jacket or coilReactors whose temperature is held by a medium flowing outside the shell, in a full jacket, a limpet (half-pipe) coil or a dimple jacket. The right one depends on the medium, its pressure and how fast heat has to move.
Hydrogenators and high pressure reactorsGas-liquid reactions under pressureStirred reactors for gas-liquid reactions under pressure, such as catalytic hydrogenation: the gas has to be dispersed into the liquid, the catalyst kept in suspension and the pressure safely contained.
Reactor agitatorsNew and replacement agitators for reactorsTop entry agitators for chemical reactors, new or as replacements for existing ones: impellers, shaft, seal and drive designed for the reaction, the vessel and its heat duty.
Crystallizer agitatorsSuspension without crystal breakageAgitators that keep crystals suspended and the liquor uniform while they grow, without breaking them or letting them settle, foul the walls or form lumps.
Fermenter and bioreactor agitatorsAeration and oxygen transfer, low shearAgitators that disperse air into the broth, keep it uniform and carry heat to the cooling surfaces, within the shear the organisms can stand, for batch, fed-batch and continuous fermentation.
Vessels and plants
Mixing tanks and agitated vesselsVessels supplied with the agitatorVessels fabricated in our own works and supplied with the agitator already designed in: nozzles, baffles, jacket and supports all placed to suit the mixing, and one supplier responsible for the result.
Pressure vesselsProcess and storage vessels under pressureStainless steel vessels that hold liquids and gases under pressure, for process and storage duty, horizontal or vertical, made in our own works on their own or as part of a plant.
Heat exchangersShell and tube, U-tube and double pipeShell and tube exchangers with fixed tubesheets or U-tubes, and double pipe exchangers, designed for your duty and fabricated in our works. Plate exchangers are supplied as part of plant packages.
Tank farmsRaw material and product storageThe storage end of a process or blending plant: tanks for raw materials, intermediates and finished products, with unloading, transfer, mixing and level control. FMT engineers the tank farm with the plant it feeds, so storage, mixing and transfer work together.
Chemical blending plantsTurnkey plants for liquid productsA blending plant turns a list of raw materials into consistent finished product: storage, dosing, agitated blend tanks, transfer, filtration and filling. FMT engineers the whole plant around the mixing and supplies it as one package.
Oilfield chemical blending plantsDemulsifiers, inhibitors, drilling chemicalsPlants that blend production and drilling chemicals (demulsifiers, corrosion and scale inhibitors, biocides, defoamers and specialty additives) to a recipe, batch after batch, often in a hazardous area and a hot climate.
Additive systemsAdditive dosing skids and blending tanksSystems that add a small, exact amount of additive to a larger stream or batch: dosing skids that inject in proportion to flow, and agitated tanks that prepare or blend the additive. FMT builds both, sized for the additive and the accuracy you need.
Process plantsTurnkey plants built around the mixingComplete plants for liquid and slurry processes: reactors and agitated vessels, heat exchangers, storage, transfer, structure and controls. FMT starts from the mixing and reaction steps, where most process problems begin, and builds the plant around them.
Mining and minerals
Leach and CIL/CIP tank agitatorsGold, uranium and rare-earth leach tanksLeach and CIL/CIP tanks hold ore slurry for many hours while the metal dissolves or loads onto carbon. The agitator has to keep the solids suspended day and night with the least power and wear. FMT designs slow, high-torque agitators for these tanks, built in Pune.
Flotation conditioner agitatorsZinc, lead, copper and phosphate plantsA conditioner tank gives the slurry time to mix with the flotation reagents before it reaches the cells. FMT designs agitators that turn the whole tank over quickly and keep the solids suspended, for zinc, lead, copper and phosphate plants.
Slurry and reagent tank agitatorsUnderflow, lime milk, flocculant and xanthateThickener underflow and slurry tanks, lime milk tanks and reagent make-up and dosing tanks are small, frequent jobs in every mineral plant. FMT designs each agitator for its fluid: keeping slurry and lime in suspension, or dissolving flocculant gently.
Precipitation tank agitatorsAlumina and rare-earth precipitatorsPrecipitators in alumina and rare-earth plants grow solid particles out of solution. The agitator has to keep the growing crystals evenly suspended and the liquor uniform, without breaking the crystals. FMT designs agitators for these tanks.