An FMT engineer replies within one working day. Budget prices from tank size and duty. +91 73852 62875WhatsAppsales@fluidmixtech.comExport buyers

Agitators for water and wastewater treatment

Flash mixers, flocculators, dosing tank agitators and equalisation tank mixers for water treatment and effluent treatment plants.

Each step of a treatment plant needs a different kind of mixing. A flash mixer disperses coagulant in seconds; a flocculator stirs gently so that flocs grow instead of breaking up; chemical dosing tanks need dissolving and blending; and equalisation tanks need enough circulation to keep solids from settling and the influent uniform.

We size each agitator for its duty and the tank, in materials suited to the water and the chemicals, and for the continuous operation treatment plants demand.

Typical mixing duties

  • Flash mixing of coagulant
  • Flocculation
  • Chemical and polyelectrolyte dosing tanks
  • Lime and slurry preparation
  • Equalisation and neutralisation tanks
  • Sludge holding tanks

What we design for

  • Low shear hydrofoils for flocculation
  • Enough circulation to keep solids suspended in equalisation tanks
  • Bridge mounting for open concrete tanks
  • Materials suited to chlorides and treatment chemicals

Equipment for water and wastewater

Common questions

What agitator is used in a flocculator?
A slow, large-diameter, low shear impeller such as a hydrofoil, run at a speed that keeps flocs moving without breaking them. The speed is often adjustable so the operator can tune it.
Can agitators be mounted on concrete tanks?
Yes, on a steel bridge across the tank. We design the bridge with the agitator and give you the loads for the civil design.

Send us your vessel. We size the agitator.

Tank size, product and what the agitator has to do is enough to start. Send a drawing, a datasheet or just a photo of the tank, and we reply with a recommended design and price, or a budget price first if you need one.

An FMT engineer replies within one working day.