An FMT engineer replies within one working day. Budget prices from tank size and duty. +91 73852 62875WhatsAppsales@fluidmixtech.comExport buyers

Slurry and reagent tank agitators

Thickener underflow and slurry tanks, lime milk tanks and reagent make-up and dosing tanks are small, frequent jobs in every mineral plant. FMT designs each agitator for its fluid: keeping slurry and lime in suspension, or dissolving flocculant gently.

An FMT engineer replies within one working dayBudget price from tank size and duty

50 HP (37 kW) geared motor for an FMT agitator, strapped in its crate
50 HP (37 kW) geared motor for an FMT agitator, strapped in its crate

Underflow and slurry holding tanks carry dense, fast-settling solids between the thickener, the filter and the pumps. Lime milk settles and scales. Flocculant make-up needs gentle mixing that dissolves the polymer without breaking its long chains. Xanthate and other collector solutions need careful materials, and a flameproof motor on request where vapours can form.

So each tank gets its own impeller and speed rather than one standard unit: axial hydrofoils or pitched blade turbines at the just-suspended speed for slurry and lime milk; a slow, low-shear impeller for flocculant; a simple turbine for reagent dissolving and dosing tanks. We supply the agitators on their own, or with the tanks and a complete dosing skid.

Where it is used

  • Thickener underflow and slurry holding tanks
  • Filter feed tanks
  • Lime milk make-up and storage tanks
  • Flocculant make-up and ageing tanks
  • Xanthate and collector make-up tanks
  • Frother and other reagent dosing tanks

How FMT builds it

Slurry and limeHydrofoil or pitched blade impeller at the just-suspended speed, wear allowance on the blades
FlocculantSlow, low-shear impeller that dissolves the polymer without shearing it
ReagentsStainless steel wetted parts as standard; flameproof motor on request where vapours can form
DriveMotor and gearbox, or a geared motor, on the tank top
SupplyAgitator alone, or with tanks, dosing pumps and pipework as a skid
Typical arrangement

The red lines show how the impeller moves the liquid. Every FMT unit is sized for its own vessel, product and duty, so yours is drawn for your tank in the offer.

Send your vessel for a drawing

What we need to size it

  • Tank size and working level
  • What the tank holds: slurry (density, solids, particle size), lime milk strength, or the reagent and its strength
  • Make-up batch size and time, or the dosing rate
  • Area classification where reagent vapours are present
  • Power supply and the mounting
Send what you have. A vessel drawing and a short description of the product and duty is enough to start; we ask for anything else we need. Send an enquiry

Common questions

Why not one standard agitator for all the reagent tanks?
Because the fluids differ. Flocculant needs gentle mixing; lime milk and slurry need solids suspension. An impeller sized for one is either too harsh or too weak for another.
Which impeller suits flocculant make-up?
A slow, low-shear impeller that wets and dissolves the polymer without breaking its chains, which would make the flocculant less effective.
Can you supply the complete reagent dosing system?
Yes: make-up and dosing tanks with their agitators, plus dosing pumps and pipework built as a skid.

Send us your vessel. We size the agitator.

Tank size, product and what the agitator has to do is enough to start. Send a drawing, a datasheet or just a photo of the tank, and we reply with a recommended design and price, or a budget price first if you need one.

An FMT engineer replies within one working day.