Engineering guides
How to choose, size and specify agitators and mixers, written by the engineers who design them.
Setting up local oilfield chemical blending in the Gulf
Why oilfield chemicals are blended locally in the Gulf, and what the plant needs: products, heat, hazardous areas, approvals, skids from India and QC.
Read the guide Plant guideBlending oilfield chemicals: what demulsifiers, inhibitors and biocides need from the plant
How demulsifiers, corrosion and scale inhibitors, biocides, defoamers and drilling chemicals differ in blending, and what that means for tanks and agitators.
Read the guide Plant guideSkid-mounted vs site-built blending plants: which suits your project?
Skid-mounted and site-built chemical blending plants compared on size, site work, schedule, shipping, expansion and cost, and when to combine the two.
Read the guide Plant guideHazardous-area design for chemical blending plants
Where flammable vapour comes from in a blending plant, how the area is classified, and what it means for agitator motors, seals, earthing, venting and layout.
Read the guide Reactor guideJacket, limpet coil or dimple jacket: choosing reactor heating and cooling
How conventional jackets, limpet (half-pipe) coils, dimple jackets and internal coils compare for pressure, heat transfer, media, cost and cleaning.
Read the guide Reactor guideHow to specify a chemical reactor: a buyer's checklist
What to put in a reactor enquiry: volume, pressure and temperature, materials, heating and cooling, agitator, seal, nozzles, instruments and documents.
Read the guide Plant guideHow to set up a chemical blending plant: a step-by-step guide
Planning a chemical blending plant: product list, batch size, raw material storage, dosing, blend tanks and agitators, changeovers, hazardous areas and layout.
Read the guide Plant guideBatch vs inline blending: which suits your chemical plant?
How batch and inline (continuous) blending compare on flexibility, quality control, powders, changeovers, output and space, and when to combine the two.
Read the guide Agitator guideChoosing agitators for chemical blending tanks
Choosing a blend tank agitator for thin, viscous and powder-laden products: impeller type, low-level mixing, heating, seals and drives for solvent service.
Read the guide Mixer guidePortable mixer vs fixed agitator: which one fits your process?
Portable mixers serve many drums, totes and tanks; fixed agitators suit one vessel in steady service. Compare cost, performance and when to choose each.
Read the guide Mixer guideRotor-stator mixer vs high-speed disperser: key differences for emulsification
How rotor-stator mixers and high speed dispersers differ in shear, droplet size, viscosity range and cost, and which suits emulsions, dispersions and powders.
Read the guide Agitator guideSide entry mixers in large storage tanks: design principles and applications
Why large tanks stratify and settle, and how side entry mixers are selected: impeller, angle and position, number of mixers, drive, seal and shaft design.
Read the guide Agitator guideMagnetic mixer vs mechanical seal agitator: leak-free mixing compared
How magnetic mixers and mechanical seal agitators contain the product, their torque limits, maintenance and cost, and which suits sterile or heavy duty work.
Read the guide Agitator guideImpeller types explained: axial, radial and hydrofoil, and when to use each
Axial, radial and hydrofoil impellers compared: how each moves the liquid, the shear and power it needs, and which suits blending, suspension or gas dispersion.
Read the guide Agitator guideHow to select the right industrial agitator: a complete checklist
A step-by-step checklist for selecting an industrial agitator: fluid, mixing duty, tank geometry, impeller, drive and power, shaft seal and materials.
Read the guide Agitator guideHow to calculate power requirements for your industrial agitator
How agitator power is worked out from impeller type, diameter, speed and fluid properties: Reynolds number, power number, a worked example and motor selection.
Read the guide Agitator guideHigh speed agitators vs standard agitators: when RPM truly matters
When a high speed agitator or disperser is worth it, and when a standard agitator does the job better: viscosity, shear sensitivity, batch time and scale.
Read the guide Agitator guideTop entry vs bottom entry vs side entry agitators: which is right for your process?
How top, bottom and side entry agitators differ in mounting, seal duty, shaft length, tank size and cost, with a quick decision guide by industry.
Read the guide