An FMT engineer replies within one working day. Budget prices from tank size and duty. +91 73852 62875WhatsAppsales@fluidmixtech.comExport buyers

Mixing tanks and agitated vessels

Vessels fabricated in our own works and supplied with the agitator already designed in: nozzles, baffles, jacket and supports all placed to suit the mixing, and one supplier responsible for the result.

An FMT engineer replies within one working dayBudget price from tank size and duty

Stainless steel mixing tank with top entry agitator, platform railing and leg supports
Stainless steel mixing tank with top entry agitator, platform railing and leg supports

When the vessel and the agitator come from different suppliers, details fall between them: a nozzle in the wrong place for the agitator mounting, missing baffles, a top head too thin to carry the drive, or a jacket that leaves the bottom unheated. Buying both from FMT removes that gap. We design the agitator first and build the vessel around it.

We fabricate in stainless steel and carbon steel: vertical vessels with dished or conical bottoms, horizontal vessels, open-top tanks and jacketed reactors, with legs, lugs or a skirt. Each vessel is supplied with its general arrangement drawing and inspection records.

Where it is used

  • Agitated reactors and process vessels
  • Mixing, blending and holding tanks
  • Jacketed vessels for heating and cooling
  • Conical bottom vessels for complete drainage
  • Horizontal storage vessels

How FMT builds it

MaterialsSS 304, SS 316 / 316L or carbon steel
ShapeVertical with dished or conical bottom, horizontal, or open top
Heating / coolingJacket on shell and bottom
SupportsLegs, lugs, or legs with lugs
FittingsNozzles, manhole, sight glass, baffles and agitator mounting
AgitatorDesigned with the vessel; any type on this site
Typical arrangement

The red lines show how the impeller moves the liquid. Every FMT unit is sized for its own vessel, product and duty, so yours is drawn for your tank in the offer.

Send your vessel for a drawing
Top head of a stainless steel mixing tank with its geared motor drive, nozzles and manway
Top head of a stainless steel mixing tank with its geared motor drive, nozzles and manway
A batch of jacketed agitated vessels in final assembly at the FMT works
A batch of jacketed agitated vessels in final assembly at the FMT works
Two polished stainless steel mixing tanks with top entry agitators
Two polished stainless steel mixing tanks with top entry agitators

What we need to size it

  • Vessel diameter, straight-side height and bottom shape (dished, conical, flat)
  • Working volume and liquid level range, including the lowest level at which mixing must continue
  • Product: density, viscosity at operating temperature, solids content and particle size
  • What the agitator must do: blend, suspend, disperse, dissolve, heat or cool, react
  • Operating and design pressure and temperature, and whether the vessel is open or closed
  • Preferred materials, seal type, motor make, power supply and hazardous-area classification
Send what you have. A vessel drawing and a short description of the product and duty is enough to start; we ask for anything else we need. Send an enquiry

Common questions

Do you supply the tank without an agitator?
Yes. Our strength is the agitated vessel, where the tank and the agitator are designed together, but we also build vessels on their own, including pressure vessels.
What information do you need to quote a mixing tank?
Working volume, product, operating pressure and temperature, material, heating or cooling duty and the nozzle list if you have one. A process sketch or P&ID is enough to start; we propose the dimensions and agitator.

Send us your vessel. We size the agitator.

Tank size, product and what the agitator has to do is enough to start. Send a drawing, a datasheet or just a photo of the tank, and we reply with a recommended design and price, or a budget price first if you need one.

An FMT engineer replies within one working day.