An FMT engineer replies within one working day. Budget prices from tank size and duty. +91 73852 62875WhatsAppsales@fluidmixtech.comExport buyers

Bottom entry high shear mixers

A rotor-stator head mounted in the bottom of the vessel, usually working with a slow top agitator. The top agitator feeds the batch down to the head, which shears it and returns it to the vessel.

An FMT engineer replies within one working dayBudget price from tank size and duty

Bottom entry high shear mixer fitted under a stainless steel tank
Bottom entry high shear mixer fitted under a stainless steel tank

Mounting the high shear head in the bottom keeps it submerged throughout the batch, so it can work on small volumes and while the vessel is being filled or emptied. Powders and oils can be added straight into the high shear zone, and the head does not draw air in from the surface.

The top agitator, typically an anchor or pitched blade, makes sure the whole batch is turned over and passes through the head. The bottom seal runs in the product under the liquid head, so we select it for the product and the cleaning regime.

Where it is used

  • Creams, lotions and ointments
  • Emulsions and sauces
  • Fine dispersions and suspensions
  • Dissolving gums and thickeners

How FMT builds it

High shear headRotor-stator, bottom mounted, direct drive on a variable speed drive
Top agitatorAnchor or pitched blade on a geared drive
Shaft sealMechanical seal selected for the product and cleaning regime
Wetted partsSS 316 / 316L
Typical arrangement

The red lines show how the impeller moves the liquid. Every FMT unit is sized for its own vessel, product and duty, so yours is drawn for your tank in the offer.

Send your vessel for a drawing
Two bottom entry high shear mixers with rotor-stator heads, before fitting
Two bottom entry high shear mixers with rotor-stator heads, before fitting
Rotor-stator mixing head: slotted stator around a four-blade rotor
Rotor-stator mixing head: slotted stator around a four-blade rotor

What we need to size it

  • Vessel diameter, straight-side height and bottom shape (dished, conical, flat)
  • Working volume and liquid level range, including the lowest level at which mixing must continue
  • Product: density, viscosity at operating temperature, solids content and particle size
  • What the agitator must do: blend, suspend, disperse, dissolve, heat or cool, react
  • Operating and design pressure and temperature, and whether the vessel is open or closed
  • Preferred materials, seal type, motor make, power supply and hazardous-area classification
Send what you have. A vessel drawing and a short description of the product and duty is enough to start; we ask for anything else we need. Send an enquiry

Common questions

Why mount the high shear mixer at the bottom?
The head stays submerged at every level, works on small volumes, takes additions straight into the shear zone and does not pull air in from the surface, which matters for emulsions.
Does it need a top agitator as well?
Usually yes. The high shear head treats only what passes through it, so a slow top agitator is used to turn the whole batch over and feed it to the head.

Send us your vessel. We size the agitator.

Tank size, product and what the agitator has to do is enough to start. Send a drawing, a datasheet or just a photo of the tank, and we reply with a recommended design and price, or a budget price first if you need one.

An FMT engineer replies within one working day.