Most oilfield chemicals are blends: one or more active ingredients mixed with solvents and additives to a formulation that suits a particular field and crude. The plant that makes them has to dose accurately, mix every product until it is uniform, and keep flammable solvents and toxic actives contained. Because many of the solvents are flammable, the blending area is usually a hazardous area, and plants in the Gulf have to run in high ambient temperatures.
FMT has clients across the Gulf, Africa and South-East Asia, and oilfield chemical blending plants are one of our main verticals. We size the blend tank agitators for the hardest product on the list, choose seals and motors for the solvents and the area classification, and engineer the plant around them: tank farm, dosing, transfer, filling and controls, with the PFD, P&ID and layout, through to erection and commissioning. For other products, see chemical blending plants.
Each section of the plant can also be supplied on its own: the tank farm, the blend tanks and their agitators, additive and chemical injection skids, and mud agitators for drilling fluid tanks. We supply oilfield plants in the UAE, Saudi Arabia, Oman, Kuwait, Qatar, Nigeria and South-East Asia, as well as in India. Our guides cover what each oilfield chemical needs from the plant, skid-mounted vs site-built plants and hazardous-area design, and setting up local blending in the Gulf.
Where it is used
- Demulsifiers (emulsion breakers)
- Corrosion inhibitors
- Scale inhibitors
- Biocides
- Defoamers
- Drilling chemicals and additives
- Specialty additive packages
- Toll blending for oilfield service companies
How FMT builds it
| Tank farm | Storage for solvents, actives and finished products, with drum and IBC unloading; storage tanks to API 650 where specified |
|---|---|
| Dosing | Load cells, flow meters or calibrated tanks, matched to the accuracy of each recipe |
| Blend tanks | Agitated vessels in SS 304, SS 316 / 316L, or carbon steel with an internal coating; ASME Section VIII design where specified |
| Agitation | Top entry agitators; high shear mixers for products that must be dispersed or emulsified |
| Heating | Jackets or coils on blend tanks, and heated or insulated storage and lines for viscous and waxy actives |
| Drives | Flameproof motors to suit the area classification; air-motor agitators where electric drives are not allowed |
| Climate | Designed for high ambient temperatures and continuous duty |
| Quality control | Sampling points on every blend tank, and a hold step so each batch is tested before release |
| Transfer and filling | Pumps, filters, piping, and drum or IBC filling |
| Layout | Plant on a structure at site, or skid-mounted modules for faster installation and later expansion |
| Controls | From manual operation to automatic batch control with stored recipes and batch records |
| Documents | PFD, P&ID, layout, equipment datasheets and GA drawings, test reports, operating and maintenance manuals, spares list |
The red lines show how the impeller moves the liquid. Every FMT unit is sized for its own vessel, product and duty, so yours is drawn for your tank in the offer.
Send your vessel for a drawing

What we need to size it
- The product list, with a typical formulation for each product
- Batch size and number of batches a day, or the daily output
- How solvents and actives arrive: road tanker, drums or IBCs
- Flash point and hazards of the solvents and products
- Hazardous-area classification of the site and the utilities available
- How finished products are packed: bulk, IBCs or drums
- Site location and ambient design temperature


