An FMT engineer replies within one working day. Budget prices from tank size and duty. +91 73852 62875WhatsAppsales@fluidmixtech.comExport buyers

Precipitation tank agitators

Precipitators in alumina and rare-earth plants grow solid particles out of solution. The agitator has to keep the growing crystals evenly suspended and the liquor uniform, without breaking the crystals. FMT designs agitators for these tanks.

An FMT engineer replies within one working dayBudget price from tank size and duty

Typical arrangement. Every FMT unit is designed for its own vessel and duty.

In the Bayer process, alumina hydrate precipitates from cooled, seeded liquor in tall tanks over many hours. In rare-earth and other hydrometallurgy plants, metals are recovered as oxalates, carbonates or hydroxides in agitated precipitation tanks. In both, particle size matters: too much shear breaks crystals into fines, too little lets them settle and scale the tank.

We size for gentle, even suspension: high-efficiency hydrofoils at a low tip speed, one or more on a long shaft for tall tanks, with a steady bearing where it is needed. Materials follow the liquor: carbon steel for caustic Bayer liquor, SS316L for chloride and acid liquors, Hastelloy on request.

Our rare-earth reference job in Visakhapatnam has two hydrofoils and a kicker on a long shaft with a steady bearing, the arrangement that also suits tall precipitation tanks. For chemical-plant crystallisers, see crystallizer agitators.

Where it is used

  • Alumina hydrate precipitators (Bayer process)
  • Rare-earth oxalate and carbonate precipitation
  • Hydroxide precipitation of nickel, cobalt and other metals
  • Seed and agglomeration tanks
  • pH adjustment and neutralisation ahead of precipitation

How FMT builds it

ImpellersHigh-efficiency hydrofoils at a low tip speed, to limit crystal breakage
ShaftLong shafts with a steady bearing and rigid removable couplings, checked for critical speed
DriveHeavy-duty gearbox and motor for continuous service
MaterialsCarbon steel for caustic liquor; SS316L for chloride and acid liquors; Hastelloy on request
InspectionUltrasonic testing of the shaft material and impeller balancing on request
Typical arrangement

The red lines show how the impeller moves the liquid. Every FMT unit is sized for its own vessel, product and duty, so yours is drawn for your tank in the offer.

Send your vessel for a drawing
Agitator shaft with two hydrofoil impellers
Agitator shaft with two hydrofoil impellers
Hydrofoil impeller fitted on an agitator shaft
Hydrofoil impeller fitted on an agitator shaft

What we need to size it

  • Tank diameter, height and working level
  • Liquor composition and temperature
  • Solids or seed loading and the target particle size
  • Residence time, and whether the tanks run in series
  • Power supply and the mounting
Send what you have. A vessel drawing and a short description of the product and duty is enough to start; we ask for anything else we need. Send an enquiry

Common questions

How do you avoid breaking the crystals?
By moving the whole tank with hydrofoils at a low tip speed, so the contents keep turning over without the high-shear zones of radial turbines.
Can one agitator serve a very tall precipitation tank?
Yes, with two or more impellers on a long shaft and a steady bearing; we check the shaft for deflection and critical speed.
Do you also supply crystallisers for chemical plants?
Yes, crystalliser agitators and crystalliser vessels with agitators are a regular FMT product.

Send us your vessel. We size the agitator.

Tank size, product and what the agitator has to do is enough to start. Send a drawing, a datasheet or just a photo of the tank, and we reply with a recommended design and price, or a budget price first if you need one.

An FMT engineer replies within one working day.